Click on an image for full-size JPG
“Oh, my aching back!” and “Dang, I’m outta rack space!” are the battle cries of road warriors everywhere. The MP 2S Mobile Mixer is designed specifically for the on-the-go discriminating DJ. The MP 2S is compact in size and refreshingly lightweight. Don’t let its petite appearance fool you. This mixer may be skinny in stature, but it’s fat on features and function. The MP 2S is easy on your back, easy on your wallet, and music to your ears!
The MP 2S is packed with all the necessary features for a great performance and perfect mix. Each Program bus selects any of the four stereo Inputs. Any Input can appear on either side of the Crossfader! You have two selectable phono/line Inputs and two stereo line Inputs for each of the two Program buses. Each Program bus has its own Bass and Treble EQ.
Identical to bigger Rane mixers, the crossfader is a long lasting, noise-free 60 mm Active Crossfader™.
The MP 2S includes many additional important features. Cue Engage on each bus, Headphone slide fader that pans Cue to Master and a powerful low-noise Headphone Amp with Level control, of course. You also get a balanced Main Mic input with full-range fader control. Outputs include a Tape Out with Pre/Post Mic sum, a balanced Auxiliary Output with Level control for booth monitoring or feeding an additional zone and a balanced house feed.
The MP 2S can handle 2 turntables and 2 CD players at the same time, or connect 4 CD players if you don't use vinyl.
The MP 2S can mount in a small road case for use with an SL 1 and Scratch Live.
| Parameter | Specification | Conditions |
| Phono Inputs: | 2 RCA stereo pairs | RIAA curve ±2 dB |
| .....Input Impedance | 47k / 220pf | |
| .....Gain | 46 dB | 1 kHz |
| Line Inputs: | 2 RCA stereo pairs | |
| .....Input Impedance | 20 k ohms | 1 kHz |
| .....Gain | 14 dB | 1 kHz |
| .....Frequency Response | 10 - 27k Hz (+0, -3 dB) | Gain 10 dB, 2 k ohm load |
| .....Noise, Unity Gain | -82 dBu | 20 kHz BW |
| .....Noise, Max Gain | -80 dBu | 20 kHz BW, re +4 dBu |
| .....THD+N | 0.05% | 20 kHz BW, 20-20k Hz, +0 dBu |
| .....Crosstalk | <-70 dB | 1 kHz |
| .....Control feedthrough | <-80 dB | 1 kHz |
| Tone Controls: | Baxandall | Two-band, shelving |
| Metering: | Dual mono, 4-segment | Peak responding |
| Mic Input: | Bal. Instrumentation | 1/4" TRS jack |
| .....Input Impedance | 511 ohms | Each leg to ground, 1 kHz |
| .....Gain | 50 dB | 1 kHz |
| .....Frequency Response | 20-20k Hz (+0, -3 dB) | Gain 50 dB |
| .....Equivalent Input Noise | -111 dBu | 150 ohm source, gain 50 dB |
| .....Common Mode Rejection | >40 dB | 150 ohm source, gain 50 dB, 1 kHz |
| House / Aux. Outputs: | Stereo | Balanced, ¼ TRS jacks |
| .....Output Impedance | 102 ohms | Each leg, 1 kHz |
| .....Gain | 6 dB | 1 kHz |
| .....Maximum Output | +26 dBu | 1 kHz, 2k ohm load |
| Tape output: | Stereo | RCA jacks, unbalanced |
| .....Output Impedance | 300 ohm | Each leg, 1 kHz |
| .....Gain | 0 dB | 1 kHz |
| .....Maximum Output | +22 dBu | 1 kHz, 2 k ohm load |
| Universal Line Voltage | 100-240 VAC | 50/60 Hz |
| .....Watts | 7 | Use C5 cord with C6 inlet |
| Agency Listing: | UL/cUL/CE | |
| Unit: Size: | 1.75"H x 19"W x 5.3"D | 4.4 cm x 48.3 cm x 13.3 cm |
| .....Weight | 4 lb | 1.8 kg |
| Shipping: Size | 4.25" x 20.3" x 13.75" | 11 cm x 52 cm x 35 cm |
| .....Shipping Weight | 8 lb | 3.6 kg |
| Note: All specifications are typical unless otherwise stated. | ||
SL 1 for Serato Scratch Live uses a laptop and any DJ mixer. MP 4 Mixer for Serato Scratch Live, 4 inputs on 2 buses in a single rack space. TTM 57SL Mixer for Serato Scratch Live, two buses & internal digital effects.
